F.A.S.T. 13 & 19 QT Cooler - Air & Water
Details
Need a replacement cooler for your air system and cool suit?
System Includes:
13 or 19 QT single element air cooler with Cool Suit pump
(Hose, blower, and cool suit not included)
Single Element VS. Twin Element Cooler
Single element consists of one aluminum tube across the bottom of the cooler for the air to travel through with one air entry port on one side of the cooler and the exit port on the other. The twin element has two shorter aluminum tubes along the bottom and are designed for both entry and exit port to be on the same side of the cooler. This set up does not give extra cooling as it is simply for the ease of placement in the car.
FAST Cooling uses only the highest-grade components in our coolers. FAST Cooling uses a Marine grade pump, and medical grade fittings to ensure longevity and performance. Inside this cooler is a custom aluminum heat exchanger, which allows you to pack the cooler with ice and water in order to get the highest temperate drop to any helmet. You can also connect this cooler to your FAST Cooling cool suit. This is a “straight through” unit with fittings on either end.
WARNING: Cooler is not recommended to be used with chemical dry ice.
Quality Injection Molded
• Insulated with High-Grade molded Polystyrene foam
• Airtight EVA Gasket Seal
• Recessed Ergonomic Carry Handles
• Self-Stopping Hinge
• Stainless Steel Latches
• All Fittings Secured with Stainless Steel Screws
• Stain and Odor Resistant
• Non-Absorbent Surface
• Easy to Clean
• Compact and Lightweight
• Complete with plumbing and installed pump
Custom aluminum heat exchanger for maximum temperature drop installed
Volume: 13 QT
Internal Dimensions: 12" x 7" x 8.5"
External Dimensions: 15" x 10" x 11"
Net Weight: 3.5 Lbs
Volume: 19 QT
Internal Dimensions: 13.5" x 8" x 10"
External Dimensions: 16.6" x 11" x 13"
Net Weight: 5.5 Lbs
Amp Draw for 13 & 19 QT: 2.7
12V
System Includes:
13 or 19 QT single element air cooler with Cool Suit pump
(Hose, blower, and cool suit not included)
Single Element VS. Twin Element Cooler
Single element consists of one aluminum tube across the bottom of the cooler for the air to travel through with one air entry port on one side of the cooler and the exit port on the other. The twin element has two shorter aluminum tubes along the bottom and are designed for both entry and exit port to be on the same side of the cooler. This set up does not give extra cooling as it is simply for the ease of placement in the car.
FAST Cooling uses only the highest-grade components in our coolers. FAST Cooling uses a Marine grade pump, and medical grade fittings to ensure longevity and performance. Inside this cooler is a custom aluminum heat exchanger, which allows you to pack the cooler with ice and water in order to get the highest temperate drop to any helmet. You can also connect this cooler to your FAST Cooling cool suit. This is a “straight through” unit with fittings on either end.
WARNING: Cooler is not recommended to be used with chemical dry ice.
Quality Injection Molded
• Insulated with High-Grade molded Polystyrene foam
• Airtight EVA Gasket Seal
• Recessed Ergonomic Carry Handles
• Self-Stopping Hinge
• Stainless Steel Latches
• All Fittings Secured with Stainless Steel Screws
• Stain and Odor Resistant
• Non-Absorbent Surface
• Easy to Clean
• Compact and Lightweight
• Complete with plumbing and installed pump
Custom aluminum heat exchanger for maximum temperature drop installed
Volume: 13 QT
Internal Dimensions: 12" x 7" x 8.5"
External Dimensions: 15" x 10" x 11"
Net Weight: 3.5 Lbs
Volume: 19 QT
Internal Dimensions: 13.5" x 8" x 10"
External Dimensions: 16.6" x 11" x 13"
Net Weight: 5.5 Lbs
Amp Draw for 13 & 19 QT: 2.7
12V