The New Powerful and Flexible Data Logger from AiM Sports
The AiM Sports EVO4S has evolved from the well-known EVO4. It maintains the same connection logic, one connector per channel, but with a completely redesigned internal electronic board, fully compatible with the last generation of AiM Dash Loggers and with the new powerful Race Studio 3 software.
The EVO4S Data Logger samples all the information you need: data coming from your vehicle ECU via CAN, RS232 or K-line, from the internal accelerometers and gyro, as well as from the GPS08 module included in the kit. Additionally, the AiM Sports EVO4S samples data from analog/digital inputs, external expansions, and predefined math channels. Sensors can be connected to 5 configurable analog channels, to the RPM input, and to 2 wheel speed inputs.
Many sensors can be connected to EVO4S via:
5 analog channels with configurable 12 bit 0-5 Volt, 0-500 mV, 0-50 mV inputs or thermocouple input, used to sample data coming from temperature, pressure, suspension and other kinds of sensors.
2 speed inputs, which allow you to monitor the individual wheel behaviors.
1 RPM input, which manages square wave signals transmitted by the ECU, or pulse signals picked from the coil command (low voltage).
Internal 3 Axial Accelerometer and Gyro Sensor
With the built-in inertial platform, the AiM Sports EVO4S Data Logger lets you have the most powerful system for understanding oversteering, understeering, banking, etc. The EVO4S features a LOW SIDE type (switch to ground) digital output. You can configure it in order to turn it on or off depending on the value of the analog or digital inputs, ECU values, expansion values, GPS information or math channels. With the AiM Sports EVO4S' CAN Outputs you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.