AiM Sports MXL2 Dash Data Acquisition System
Details
MXL2: The Powerful Dash Logger for All Racers
The AiM Sports MXL2 is a new AiM dashlogger that provides all the information professional racers need, as well as newbies. The MXL2 has been designed with the goal of making configuration and usage smooth and easy, both for amateurs and individuals with sophisticated technical backgrounds.
MXL2 acquires and displays data coming from your vehicles ECU, the internal accelerometer, and gyro, as well as from the GPS08 module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules.
CAN Output
With the CAN output, the MXL2 makes sending messages directly to an existing CAN network quick and easy, increasing the range of your vehicle control possibilities.
Freely Configurable Pages
You can define up to eight different custom pages, choosing from a wide library of page styles, defining which data to be shown, their end of scale, and unit of measure.
Seen below are examples of pages with 1, 2, 3 or 4 different data:
Sharp Liquid Crystal Display
The AiM Sports MXL2 Dashlogger features a high contrast traditional Liquid Crystal Display (LCD), with a black to white ratio that is nearly double that of previous models, fused with a graphical LCD that offers great flexibility in the information displayed and alerts.
The MXL2 now offers a dual colored backlight of high contrast white and red which can also be changed based on changing data conditions. An ambient light sensor continuously adjusts the backlight to remain at an optimum brightness level.
Flexible Alarms
The MXL2 Dashlogger has six different alarm LEDs; freely choose the conditions that trigger each light, the color each light flashes, and the frequency of the flashing. You’re able to configure each light to turn on/off depending on analog or digital inputs, ECU values, expansion values, GPS information, or math channels.
You can also associate an alarm LED message with a change in backlight color that also provides a digital output with each event.
Two Digital Output
The MXL2 Dashlogger also features two digital outputs. The two digital outputs (Dout) are LOW SIDE type (switch to ground). They can be configured to switch on/off (close/open) depending on the value of the analog or digital inputs. The digital outputs allow you to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.
Integrated Shift Light Array
The integrated shift light array is a hallmark of the MXL, but an even better 10 LED shift light array is found in the MXL2. Choose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking. The MXL2 Dashlogger even allows for different shift light programs for each unique gear when required.
Adapter Harness for MXL Strada/Pista
Do you currently run an MXL Dash (Strada or Pista) in your vehicle? Connecting the MXL2 couldn’t be any easier. You don’t need to rewire your entire car again; just connect the specific adapter harness to your standard AiM MXL harness and immediately unlock the great potential of the newest MXL2 Dashlogger.
Expanding the System According to Your Needs
Using the built-in CAN bus, you can add expansion modules to the MXL2 Dashlogger to increase its performance and aquire more data.
Thanks to the GPS08 Module and Race Studio 3 software, you can immediately get lap times and all data needed for engine tuning as well as for improving driving technique. | |
The Channel Expansion add-on allows you to add four (4) 0-5 Volt analog channels. | |
The TC Hub allows for the addition of 4K thermocouples. | |
This wideband Lambda controller, LCU-One, has a Bosch LSU 4.9 probe, providing all Air/Fuel data, lambda value, and exhaust gas temperature. This allows you to perfectly tune your vehicles carburetion. | |
AiM's onboard cameras allow you to capture your exhilarating time on track. |
Race Studio 3 Configuration |
WiFi Connectivity
Configure, calibrate, and download your data wirelessly over a secure 802.11 WiFi connection.
Ratings & Reviews
2 Reviews
MXL2 and you
Love the AiM line of data acquisition. So many different options. Great system, reasonably easy to install, tools for review of data are simple and thorough. get one for your race car and see where you can go faster by reading data.
Alex Rockwell
10/20/2016 11:58:00
Aim Dash
Perfectly integrates with my Controls Pack Boss 302R clone. Winding road is a pleasure to deal with, and customer service is best in the business. These guys know their race cars!
Jason Bleak
07/15/2019 8:07:00