AiM Sports MXP Dash Data Acquisition System

(0)No Reviews yet


MXP: A 6-Inch Color TFT Display Dash Logger for All Racers

The AiM Sports MXP Dash Logger offers 50% more display area than the 5'' MXS display, in a similar dimension. The dash logger has an integrated shift array, configurable multicolor alarms, drag and drop multi-page configuration, Wi-Fi and USB connectivity, GPS Module, inertial platform, analog, and digital inputs, digital outputs, Motorsport connectors, 4 GB of internal memory, 1,000Hz per channel sampling and support for over 1,000 ECU connections.

MXP samples data coming from your ECU, the GPS Module, the 9 axis inertial platform (accelerometer, gyro, and magnetometer), 8 fully configurable analog inputs, 6 digital inputs, predefined math channels, and second CAN. The amount of performance and data acquired can also be increased incrementally by adding up to eight expansion modules.

CAN & Digital Outputs

With the CAN Output on the AiM Sports MXP Dash Logger, you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities. The AiM Sports MXP also features two digital outputs. The two digital outputs (Dout) are LOW SIDE type (switch to ground): they can be configured to perform many tasks that require on/off functions based on values of analog or digital inputs. This allows you to automatically run external systems (i.e. to switch on/off additional lights, to activate/de-activate a cooling fan, or circulation pumps, etc.) when a certain event happens.

Freely Configurable Pages

You can define all the custom pages you wish, choosing from among a vast library of page styles, defining which data to be shown, their end of scale, and unit of measure. Swapping between pages can be managed by easily pushing one or two of the metal pushbuttons on the side of your MXP Dash Logger.

Seen below are examples of pages with different data:


High Contrast TFT Display

A high contrast TFT display is what separates the AiM Sports MXP Dash Logger from the competition. An ambient light sensor keeps the backlight at optimum brightness levels.


Flexible Alarms

The AiM Sports MXP Dash Logger features five configurable RGB alarm LEDs: you choose the conditions that cause them to activate and you choose the color that comes on, also select between a solid alarm or flashing one - and the flashing frequency. With your AiM MXP, you can choose to have an accompanying text message that scrolls at the bottom of the screen, as well as set the alarm priorities. Furthermore, you can select from "street icons" you may need to incorporate into your display; choose from among the wide list of icons you will find in “Race Studio 3 – Icons Management” and set them up according to your needs. Any of the icons are fully configurable and if this shouldn’t be enough, you will be able to upload and set up your own customized icons.

Integrated Shift Light Array

Choose from a host of advanced multicolored RGB shift light patterns available on the MXS Dash Logger; they can be customized as you like, and for each unique gear when required.

Camera Inputs

With your AiM Sports MXP, two analog camera inputs are available, allowing you to swap your display into a mirror camera, through pushbutton command or event management.


Expanding the System According to Your Needs

Using the built-in CAN bus, you can add expansion modules to the MXS Dash Logger to increase its performance and acquire more data.

  • GPS08 Module

Thanks to the GPS08 Module and Race Studio 3 software, you can immediately get lap times and all data needed for engine tuning as well as for improving driving technique.

  • Channel Expansion

The Channel Expansion add-on allows you to add four (4) 0-5 Volt analog channels.

  • TC Hub

      The TC Hub allows for the addition of 4K thermocouples.

  • LCU-One Lambda Controller

This wideband Lambda controller, LCU-One, has a Bosch LSU 4.9 probe, providing all Air/Fuel data, lambda value, and exhaust gas temperature. This allows you to perfectly tune your vehicles carburetion.

  • SmartyCam HD Cameras

AiM's onboard cameras allow you to capture your exhilarating time on track.


Race Studio 3 Configuration

The MXP is to be configured via Race Studio3: you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital output, Alarms, Shift Lights and all the expansions you need. 

WiFi Connectivity

Configure, calibrate, and download your data wirelessly over a secure 802.11 WiFi connection.

Ratings & Reviews

No reviews available

Be the first to Write a Review