AiM Sports MXS Dash Data Acquisition System
Details
MXS: A Compact TFT Display Dash Logger for All Racers
The AiM Sports MXS is a dash logger that is designed to acquire and display data coming from your vehicle's ECU, the MXS Dash Logger's internal accelerometer and gyro, as well as from the GPS08 Module included in the kit, analog/digital inputs, and predefined math channels. Performance and data acquired can also be increased by adding up to eight expansion modules. Its 5" TFT display has been specifically designed for small cockpits installation.
CAN & Digital Outputs
With the CAN Output, you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities. Also, the AiM Sports MXS Dash Logger features two digital outputs. The two digital outputs (Dout) are LOW SIDE type (switch to ground): they can be configured in order to be turned on/off depending on the value of the analog or digital inputs. They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.
Freely Configurable Pages
You can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of
Seen below are examples of pages with different data:
High Contrast TFT Display
A high contrast TFT display is what separates the AiM Sports MXS Dash Logger from the competition. An ambient light sensor keeps the backlight at optimum brightness levels.
Flexible Alarms
The AiM Sports MXS Dash Logger features six configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities.
Choose from a host of advanced
Expanding the System According to Your Needs
Using the built-in CAN bus, you can add expansion modules to the MXS Dash Logger to increase its performance and acquire more data.
Thanks to the GPS08 Module and Race Studio 3 software, you can immediately get lap times and all data needed for engine tuning as well as for improving driving technique. |  |
The Channel Expansion add-on allows you to add four (4) 0-5 Volt analog channels. |  |
The TC Hub allows for the addition of 4K thermocouples. |  |
This wideband Lambda controller, LCU-One, has a Bosch LSU 4.9 probe, providing all Air/Fuel data, lambda value, and exhaust gas temperature. This allows you to perfectly tune your vehicles carburetion. |  |
AiM's onboard cameras allow you to capture your exhilarating time on |  |
Race Studio 3 Configuration The MXS Strada is to be configured via Race Studio3: you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital output, Alarms, Shift Lights and all the expansions you need. |  |
WiFi Connectivity
Configure, calibrate, and download your data wirelessly over a secure 802.11 WiFi connection.
