AiM Sports Patch Cable 5-pin 712-712 Male-Male CAN Cable For SmartyCam HD v1
Details
These CAN cables have male 5-pin 712 (screw-in) connectors at each end. They can be used to connect the AiM SmartyCam HD (version 1) to your AiM logger or SMC Bridge.
Note: Not compatible with the original SmartyCam (with the viewing screen on top) or the later SmartyCam HD "Rev 2". The version 1 can be identified by a 7/8" diameter lens with either a 67 or 87 degree field of view, and a viewfinder flush with the front of the housing. Later SmartyCam HD Rev 2 had a larger 1 3/8" OD lens marked as 60 or 120 degree field of view and a cover over the front viewfinder held on by 8 screws. The original SmartyCam and SmartyCam HD Rev 2 require a CAN cable with a 7-pin connector.
Although the connectors are correct, this cable cannot be used to connect the SmartyCam HD GP bullet camera to the base recording unit.
Although the connectors are correct, this cable cannot be used to connect the SmartyCam HD GP bullet camera to the base recording unit.