The Cool-a-Clava is COOLSHIRT’s
answer to keeping a cool head under pressure. It is a helmet insert
that can plug into any of our current ice based and non-ice based
systems to provide the best head cooling that is unrivaled by
any current air or water based head cooling unit on the planet.
There is no special hardware to purchase and this system is
compatible with almost every helmet currently on the
Instructions for Installation &
1) Insert Cool-A-Clava up into
helmet. We recommend using double sided tape or Velcro to hold it
in place. The Cool-A-Clava should be checked for comfort before
using tape or Velcro
to hold in place.
2) Once the Cool-A-Clava is in
the helmet, place helmet on head just the way you normally would.
Keep the hoses coming off of the product out of the way. You want
the hoses to come out at the base of the helmet in the back of the
3) Once in the car, route the
Cool-A-Clava hoses so that they do not interfere with any other
safety equipment. The hoses will be routed down to your shirt. If
using only the Cool-A-Clava you can route the hoses to your
hose coming off of the cooler.
4) Plug the male fitting from
the product into the female fitting of the hose coming from your
cooler. Plug the female fitting from the product into one of the
male fittings from your shirt. Plug the other male fitting from the
shirt into the other female fitting on the hose coming from your
5) Turn the cooler on. It will
pump the water through both the shirt and Cool-A-Clava.
Shop Now! >>
is currently empty
Stay up-to-date on the latest auto racing news and products by joining our mailing list (We will never give your information to anyone else).
Need to redeem a gift card? Click here.